Description
Flywheel rotor generator regulator gasket set for Kawasaki GPz 500 S VN 500 Vlucan
Characteristics:
The set includes flywheel rotor, stator, regulator/rectifier and seal.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator that damages the stator within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: 100% new (aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of mounting holes: 3
Number of poles: 18
Inner diameter: 38 mm
Outer diameter: 102 mm
Including pulse generator coil.
regulator
Number of wires: 6
Number of plugs: 1
Number of pins: 6
Please compare the number of pins and connectors with your old part before purchasing.
Part number:
Stator assembly: 21003-1123
Pulse generator: 59026-1126
Rectifier/Regulator: 21066-1030
Improved flywheel: 21050-1110, 21050-1171
Generator cover gasket: 11009-1486, 11061-0273, 11009-1834
(Always compare the part numbers with your exploded views and use cross-references where appropriate.)
This is NOT an original part. The OEM part numbers provided are for product identification and comparison purposes only.
Suitable for make/model/year:
For Kawasaki EN400 EN400 Twin 1989
For Kawasaki EN400 Vulcan 400 1990–1993
For Kawasaki EN450 Vulcan 454LTD 1985–1990
For Kawasaki EN500 Vulcan 500 1990–1996
For Kawasaki EX400 GPZ400S 1988–1990
For Kawasaki EX500 GPZ500 1987–1993
For Kawasaki EX500 GPZ500S 1988–1995
(Compatibility table is for reference only!)
(Please compare your defective component with the provided image to determine compatible models.)
Scope of delivery:
1 x 3-core generator stator
1 x Generator pulse generator
1 x 6-wire controller
1 x Crankcase gasket
1 x flywheel rotor
(Scope of delivery as shown.)
A notice:
Before installing the new stator-regulator-rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part.
All cables are installed in the correct order; please do not change the wiring.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, be sure to ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only mentioned to identify the offered product as an accessory or spare part, in order to clarify for which vehicle the product is suitable.
Characteristics:
The set includes flywheel rotor, stator, regulator/rectifier and seal.
Meets or exceeds OEM quality; direct replacement for your original part.
Perfect fit and ready to install immediately.
Always use sealant for the cable gland.
Instructions are not included.
Danger:
One of the most common reasons for stator failure is a defective regulator that damages the stator within a very short time.
Therefore, we strongly recommend replacing both parts. Technically modified stators are excluded from exchange.
Specifications:
Condition: 100% new (aftermarket)
Type: Stator and regulator kit
Further specifications:
stator
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of mounting holes: 3
Number of poles: 18
Inner diameter: 38 mm
Outer diameter: 102 mm
Including pulse generator coil.
regulator
Number of wires: 6
Number of plugs: 1
Number of pins: 6
Please compare the number of pins and connectors with your old part before purchasing.
Part number:
Stator assembly: 21003-1123
Pulse generator: 59026-1126
Rectifier/Regulator: 21066-1030
Improved flywheel: 21050-1110, 21050-1171
Generator cover gasket: 11009-1486, 11061-0273, 11009-1834
(Always compare the part numbers with your exploded views and use cross-references where appropriate.)
This is NOT an original part. The OEM part numbers provided are for product identification and comparison purposes only.
Suitable for make/model/year:
For Kawasaki EN400 EN400 Twin 1989
For Kawasaki EN400 Vulcan 400 1990–1993
For Kawasaki EN450 Vulcan 454LTD 1985–1990
For Kawasaki EN500 Vulcan 500 1990–1996
For Kawasaki EX400 GPZ400S 1988–1990
For Kawasaki EX500 GPZ500 1987–1993
For Kawasaki EX500 GPZ500S 1988–1995
(Compatibility table is for reference only!)
(Please compare your defective component with the provided image to determine compatible models.)
Scope of delivery:
1 x 3-core generator stator
1 x Generator pulse generator
1 x 6-wire controller
1 x Crankcase gasket
1 x flywheel rotor
(Scope of delivery as shown.)
A notice:
Before installing the new stator-regulator-rectifier:
Check the AC output voltage of the stator.
Replace all burnt or corroded connections on the stator and regulator/rectifier.
Check and repair any melted cables.
Use high-temperature dielectric grease on all connections.
Our stator/regulator may use a different cable color coding than your original part.
All cables are installed in the correct order; please do not change the wiring.
This stator is designed as a direct plug-in replacement and should be used as such.
Always use threadlocker when screwing on the stator.
If our stator contains a pickup coil, be sure to ensure the correct air gap during installation.
You will receive exactly what you see in the pictures. If in doubt, compare our product with your original part.
The product offered is an accessory or spare part and therefore not an original part from the vehicle manufacturer.
The name of the vehicle manufacturer is only mentioned to identify the offered product as an accessory or spare part, in order to clarify for which vehicle the product is suitable.
