{"product_id":"full-color-qy6-0068-replacement-printhead-printer-head-for-pixma-ip100-ip110","title":"Full Color QY6-0068 Replacement Printer Head for Canon Pixma IP100 IP110","description":"QY6-0068 Printhead for Pixma IP100 IP110 replacement\u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade from high-quality material, durable, firm and stable for us.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed printhead.\u003cbr\u003eGood stability, long service life.\u003cbr\u003eFull color function.\u003cbr\u003eProduct condition: original refurbished printhead, 95% new.\u003cbr\u003eWarranty: one year free warranty, lifetime service.\u003cbr\u003eOEM code: QY6-0068\u003cbr\u003e\u003cbr\u003eCompatible models:\u003cbr\u003eFits QY6-0068 Pixma IP100 IP110\u003cbr\u003e\u003cbr\u003ePackage includes:\u003cbr\u003e1 x printhead\u003cbr\u003e\u003cbr\u003eA notice:\u003cbr\u003e1. If pressure is entered, turn off the printer's power supply, or it will cause the mainboard chip to burn out.\u003cbr\u003eAfter loading the printhead, please do not install any Ribbon Overhead 10 A4 documents.\u003cbr\u003eSo, the new needle is part of the ongoing process, and then you insert the ribbon. I hope you can operate it more carefully.\u003cbr\u003e2. If the original printhead broke and leaked, the mainboard may have been damaged.\u003cbr\u003ePlease fix the mainboard problem before replacing the printhead. Additionally,\u003cbr\u003eThe F1, F2 Fuze wire of the motherboard can only be replaced by the original Fuze wire, which has the same current value and model.\u003cbr\u003eWhen replacing FUZE, which is a different current value and model, both the printhead and the mainboard are defective.\u003cbr\u003e3. The printhead requires a lot of attention; it is easy to cause considerable damage if a non-professional replaces the printhead blindly.\u003cbr\u003eThere is a regulation that the printhead is not guaranteed, and it is delicate and expensive.\u003cbr\u003ePlease do not start up the machine yourself, and please handle it with care.\u003cbr\u003e4. If you are not familiar with the machine, it is recommended that you send the printhead to a repair station.\u003cbr\u003eOr find professionals to replace the nozzle to avoid unnecessary losses and difficulties.\u003cbr\u003e\u003cbr\u003eBefore installing this product, please pay attention to the following:\u003cbr\u003e1. When you receive the printhead, using a needle to inject water to check the nozzle or see if it's blocked is highly redundant and dangerous. If the print quality is unclear, press the machine cleaning button (the first of all). As soon as the printhead enters the water, if the water isn't dry, it will be damaged. The mainboard will burn out, and the printhead will be destroyed. Secondly, the printheads sold in our store have been rigorously tested and filled with protective fluid. Using a needle to inject water into the printhead will not only wash away the protective fluid but also easily cause air bubbles within the printhead, resulting in no ink being printed.\u003cbr\u003e2. Note that when installing the printhead, make sure to disconnect the power supply first and install it in place.\u003cbr\u003e3. When you plug in the power cord, make sure there is no ink on it and that it is in good contact with the socket.\u003cbr\u003e4. The steel shaft should also be clean and smooth. You can use a paper towel to apply a little lubricating oil to clean it. Do not add oil directly to the shaft. Excess oil will flow to the printhead and cause damage.\u003cbr\u003e5. After checking that the machine and electrical circuit are all working correctly, check the water circuit. First, check if the ink level in the ink cartridge is sufficient; second, check if the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed printhead, so it won't print normally immediately. The printer can only produce perfect results after the air in the printhead has been completely purged. You can use the machine's built-in cleaning function for intermittent cleaning (two cleaning cycles each time, and then two more after 30 minutes). Repeated over-cleaning will cause ink to accumulate in the cleaning pump, leading not only to color mixing, ink leakage, and wasted ink, but also to allow the printhead to vent during operation.","brand":"viprh","offers":[{"title":"Default Title","offer_id":40975677161611,"sku":"W002-D054","price":58.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/2574\/0171\/products\/0709e4290f9f04268304b640bfee09aa_b219779e-d5f5-4fa8-a8ea-b3452edd7ea9.jpg?v=1668512814","url":"https:\/\/voprch.com\/en-ie\/products\/full-color-qy6-0068-replacement-printhead-printer-head-for-pixma-ip100-ip110","provider":"viprh","version":"1.0","type":"link"}