{"product_id":"blikvm-hat-remote-control-server-pikvm-operation-maintenance-kvm-remote-control","title":"BliKVM Has Remote Control Server Pikvm Operation Maintenance Kvm Remote Control","description":"\u003cp\u003eBliKVM V3 HAT remote control, BlikVM server operation and maintenance, KVM remote control, PikVM operation and maintenance, Overip\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis product does not include the Raspberry Pi 4B motherboard. Please read the product description carefully before purchasing.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eIntroduction to PiKVM:\u003c\/strong\u003e\u003cbr\u003ePiKVM is a remote management solution based on open-source software and hardware technology. It can establish a remote connection via the Raspberry Pi, power the computer on\/off or restart it, and even reinstall the operating system using virtual software. With a CD-ROM or flash drive, you can emulate a keyboard, mouse, and monitor and then view them in a web browser as if you were working directly on the remote system. It does not rely on a remote port, protocol, or service!\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eBliKVM Hat product launch:\u003c\/strong\u003e\u003cbr\u003eThe BliKVM Hat version is a hardware device based on the Raspberry Pi 4B and used for KVMOverIP. Hat's main features include HDMI video capture, ATX control, PoE power supply, OLED screen display, and RTC clock protection and heat dissipation. It can be installed in a 1U rack and supports both BlikVM and PikVM mirrors.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eAccessory introduction:\u003c\/strong\u003e\u003cbr\u003eATX module\u003cbr\u003eThe ATX module is connected to the computer's motherboard via a DuPont cable.\u003cbr\u003eATX modules are supplied with full and half height PCIe frames.\u003cbr\u003eUSB\/PWR distribution board\u003cbr\u003eThe RPI4 port is used to connect to the Raspberry Pi 4B.\u003cbr\u003eThe USB port is used to connect to the controlled computer.\u003cbr\u003eWhen using a PoE power supply, the use of a power distribution box is not required.\u003cbr\u003eHDMI Simulator\u003cbr\u003eIf the controlled computer cannot output the screen correctly, you can try to solve the problem with this module. After connecting this module to the HAT, connect it to the controlled computer using an HDMI cable.\u003cbr\u003eUSB\/PWR distribution board\u003cbr\u003eThe metal housing protects the cap and dissipates heat. Each port on the housing has a transparent silkscreen print indicating its purpose. This housing can easily be installed in a 1U rack.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eHardware details:\u003c\/strong\u003e\u003cbr\u003eHDMI input\u003cbr\u003eThe bridge chip is a Toshiba TC358743, which supports both video and audio (I2S). The maximum input resolution is 1080p at 50 frames per second. The HDMI return current issue has been resolved.\u003cbr\u003eCN-ATX\u003cbr\u003eThe CN-ATX interface is connected via a network cable to the ATX adapter board (accessory for HAT), which can turn the controlled computer on, off and restart it.\u003cbr\u003eshow\u003cbr\u003eWhite OLED display with 128x32 resolution and SSD1306 chip. This display can show the temperature, IP address, and other information of the Raspberry Pi.\u003cbr\u003ePOE\u003cbr\u003eStandard: IEEE 802.3af PoE Input voltage: 37–57 VDC Output power: 5 VDC\/2.4 A\u003cbr\u003ePlug in the PoE jumper cap and activate the PoE power supply.\u003cbr\u003efan\u003cbr\u003eThe IPKVM HAT houses a small fan that is controlled by your Raspberry Pi via GPIO12.\u003cbr\u003eReal-time clock\u003cbr\u003eThe clock chip is a PCF8563 and is controlled by your Raspberry Pi via I2C. The coin-shaped battery is located under the HDMIIN module.\u003c\/p\u003e  \u003cp\u003ePackage contents:\u003cbr\u003e1x Raspberry Pi IPKVM HAT\u003cbr\u003e1x ATX adapter board\u003cbr\u003e1x USB\/PWR splitter\u003cbr\u003e1x HDMI pass-through EDID emulator\u003cbr\u003e1x metal housing\u003cbr\u003e1x 32GB TF card\u003cbr\u003e1x USB Type-C to USB Type-C cable\u003cbr\u003e1x Dupont cable 8-pin male to male 40cm\u003cbr\u003e1x Dupont cable 8-pin male to female 40cm\u003cbr\u003e1x Phillips screwdriver\u003cbr\u003e1x Phillips head socket\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGuarantee:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to request a return within 60 days of receiving the product.\u003cbr\u003e24-hour expert support: We solve your installation and product problems.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"viprh","offers":[{"title":"Default Title","offer_id":42535821770891,"sku":"E201-A116","price":110.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/2574\/0171\/files\/07ca2a21f2c97726a265a60c14e6b59d.jpg?v=1718862364","url":"https:\/\/voprch.com\/en-gb\/products\/blikvm-hat-remote-control-server-pikvm-operation-maintenance-kvm-remote-control","provider":"viprh","version":"1.0","type":"link"}